Reference Standards:
ASTM B210M-2005 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
ASTM B221M-2007 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B221-08 Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B234-2004 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM B234M-2004 Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
ASTM B241/B241M-02 Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B313 / B313M - 09 Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes
ASTM B317/B317M-07 Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B345/B345M-02 tandard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
ASTM B361 - 08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
ASTM B404/B404M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
ASTM B429/B429M-06 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM B483/B483M-03 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
ASTM B491/B491M-06 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM B547/B547M-02 Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
ASTM B744/B744M-05 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
ASTM B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ANSI/ASTM F1281-2007 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ANSI/ASTM F1282-2005 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ANSI/ASTM F1974-2008 Specification for Metal Insert Fittings for Polyethylene/aluminum/polyethylene and Crosslinked Polyethylene/aluminum/crosslinked Polyethylene Composite Pressure Pipe
ANSI/ASTM F2262-2005 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ANSI/ASTM F2434-2008 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing and SDR9 Cross-Linked Polyethylene/Aluminum/Cross-Linked Polyethylene (PEX-AL-PEX) Tubing
ANSI/UL 797A-2007 Electrical Metallic Tubing - Aluminum (Proposal dated 6-8-07)
EN 754-7-1998 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-7-1998 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
BS EN 755-8-2008 Aluminium and aluminium alloys - Extruded rodbar, tube and profiles
EN 13957-2003 Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
EN 13958-2003 Aluminium and aluminium alloys - Cold drawn round, coiled tube for general applications - Specification
EN 1592-1-1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
EN 1592-2-1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties
EN 1592-3-1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
EN 1592-4-1997 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
EN 2070-4-1989 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures
EN 2070-5-1989 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure
EN 2257-1997 Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions
EN 2258-1997 Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm ≤ D≤ 100 mm - Thickness 0,6 mm ≤ a 2,5 mm - Dimensions
EN ISO 15546-2002 Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
EN 2813-1999 Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm
EN 3557-1997 Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications 0,6 mm a 3,0 mm
EN 60614-2-7-1995 Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy
JIS H4080-2006 Aluminium and aluminium alloys extruded tubes and cold-drawn tubes
JIS H4090-1990 Aluminium and aluminium alloy welded pipes and tubes
JIS H4090 AMD 1-2006 Aluminium and aluminium alloy welded pipes and tubes (Amendment 1)
NF A50-616-1998 (Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 7 : seamless tubes, tolerances on dimensions and form.)
NF A50-617-1998 (ALUMINIUM AND ALUMINIUM ALLOYS. COLD DRAWN ROD/BAR AND TUBE. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 754-8).)
NF A50-620-2004 (Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.)
NF A50-636-1999 (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 7 : seamless tubes, tolerances on dimensions and form.)
NF A50-637-1998 (ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-8).)
NF A50-638-9-2001 (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.)
NF A50-645-2004 (Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.)
NF A50-802-1988 (ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.)
NF L10-600-4-1990 (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PROUDCTS. TECHNICAL SPECIFICATION. PART 4 : TUBE FOR STRUCTURES. (EUROPEAN STANDARD EN 2070-4).)
NF L10-600-5-1990 (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 5 : TUBE USED UNDER PRESSURE. (EUROPEAN STANDARD EN 2070-5).)
NF L15-611-1973 (DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. COMMON TOLERANCES.)
NF L15-612-1973 (DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. PRECISION TUBES.)
NF L15-640-1973 (SQUARE DRAWN TUBES IN ALUMINIUM ALLOYS.)
NF L15-641-1973 (RECTANGULAR DRAWN TUBES IN ALUMINIUM ALLOYS.)
NF L15-650-1997 (Aerospace series. Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm inferior or equal to D inferior or equal to 100 mm. Thickness 1 mm inferior or equal to a inferior or equal to 6 mm. Dimensions.)
NF L15-651-1997 (Aerospace series. Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm inferior or equal to D inferior or equal to 100 mm. Thickness 0,6 mm inferior or equal to a inferior or equal to 2,5 mm. Dimensions.)
NF L15-660-1978 (TORPEDO-SHAPED TUBES IN ALUMINIUM ALLOYS.)
NF L31-613-1989 (AEROSPACE SERIES. COLLARS,ALUMINIUM ALLOY. (EUROPEAN STANDARD EN 2365).)
